diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..1cd791b --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +result/ diff --git a/fish.conf.nix b/fish.conf.nix new file mode 100644 index 0000000..d5247e6 --- /dev/null +++ b/fish.conf.nix @@ -0,0 +1,162 @@ +'' +#### BEGIN ALIASES #### +alias v='nvim' + +alias vcf="v ~/.config/nvim/init.vim" + +alias vw='nvim ~/vimwiki/index.wiki; commit-vimwiki' + +function commit-vimwiki --description "go to and from the vimwiki directory, commit with message (to encourage uh, good stuff, and go back" + cd ~/vimwiki + git add * + git commit + prevd +end + +alias vt='nvim ~/vimwiki/Tasks.wiki' + +alias vwo="firefox ~/vimwiki_html/index.html" +alias vwr="nvim -c "VimwikiAll2HTML" -c "q" ~/vimwiki/index.wiki" +alias nv='neovide' +# alias hx='helix' +alias lv="~/.local/bin/lvim" +alias e='emacs' +alias ce='code .' +alias se="serve ." +alias co='code --reuse-window' +alias ok='okular' +alias ko='kitty .' +alias du="du -h --total" + +#exa +alias ls="exa" +alias tree="exa --tree -I target" + +# some more ls aliases +# alias ls='ls --color=always' +alias ll='ls -alF' +alias la='ls -a' +alias l='ls -CF' + +#some cargo aliases :) +alias c='cargo' +alias cn='cargo new' +alias cnl='cargo new --lib' +alias ci='cargo init' +alias cr='cargo run' +alias cb='cargo build' +alias ct='cargo test' +alias cv='cargo clippy' +alias cf='cargo flamegraph' +alias cff='cargo flamegraph;firefox flamegraph.svg' +alias cvp='cargo clippy -- -W clippy::pedantic' +alias cw="cargo watch -c --poll -x 'clippy -- -W clippy::pedantic'" +alias cwr='cargo watch -c -x run' +alias cwt='cargo watch -c -x test' +alias cbr='cargo build --release' +alias crr='cargo run --release' +alias crd="cargo rustdoc" +alias cft="cargo fmt" +alias cdc="cargo doc; firefox target/doc/settings.html" + +#general rust aliases +alias rft='rustfmt' + +#git aliases +alias g="git" +alias gcs="batcat -p -l bash /home/mehbark/main/misc/gitCliCheatSheet.js" +alias gco="git checkout" +alias gb="git branch" +alias gc="git commit -m" +alias gst="git status" +alias ga="git add" +alias gp="git push" +alias gl='git log --oneline --graph --decorate --all' +alias gi='git init' + +#more complex aliases +alias ri="git init; cargo init" +alias rn="new_cargo_quick" +alias ka="killall -r '.*'" + +function new_cargo_quick --description "make a cargo project with git version control, cd to it and open vscode" +mkdir "$argv[1]" +cd "$argv[1]" +git init +cargo init +code . +end + +function speed-up --description "take arg 1, speed it up by arg 3 and output it to arg 2" + echo "$argv[1]" + mencoder -o "$argv[2]" -speed "$argv[3]" -ovc lavc -oac lavc "$argv[1]" +end + +alias doom='~/.config/emacs/bin/doom' +alias pipers='pipes-rs' +alias yt='yt-dlp' +alias compile_and_serve="cargo run --quiet --release example_in example_out;cd example_out;serve;cd .." +alias icat="kitty +kitten icat" + +alias do="dolphin . &> /dev/null &" + +#homestuck +alias hnav "source /home/mbk/hs/bin/hsnav" +alias hstree "tree ~/hs" +alias codestuck "code ~/hs" + +function m + mkdir $argv[1] + cd $argv[1] +end + +function playflac + flac -c -d $argv | aplay +end + +function filelink + echo "file://$(realpath $argv)" +end +alias xpy '~/Aims/rust/x.py' +alias sbcl "rlwrap sbcl" +alias guile "rlwrap guile" +#alias clj 'clojure -Sdeps "{:deps {com.bhauman/rebel-readline {:mvn/version \"0.1.4\"} $args}}" -m rebel-readline.main' +alias csi "rlwrap chicken-csi" + +# zig +alias zb "zig build" +alias zbr "zig build run" +alias zbt "zig build test" + +# nix +alias nrb "sudo nixos-rebuild" +#### END ALIASES #### +export PATH="$HOME/.yarn/bin:$HOME/.config/yarn/global/node_modules/.bin:$HOME/.local/bin:$HOME/.emacs.d/bin:$PATH:$HOME/.ghcup/bin:$HOME/.cabal/bin:$HOME/hs/bin:$HOME/.cargo/bin:$HOME/.deno/bin:$HOME/Aims/curlfire" + +# [ -f ~/.fzf.bash ] && source ~/.fzf.bash +# setopt autocd +fish_vi_key_bindings +fish_vi_cursor +starship init fish | source +export RUSTC_FORCE_INCREMENTAL=1 +export EDITOR="nvim" +export TROLLNAMES_PATH="/home/mbk/hs/content/mine/trollname/6-letter-english-words.txt" + +set fish_greeting + +if status is-interactive +if set -q ASCIINEMA_REC +return +end +if test $PWD = "/home/mbk/hs" +homestartup +else +fortune | cowsay +end +end + +export CHEZSCHEMELIBDIRS="/home/mbk/Aims/chez/thunderchez:/home/mbk/Aims/chez/thunderchez:/home/mbk/Aims/chez/chez-srfi:/home/mbk/Aims/chez/pfds" + +# opam configuration +source /home/mbk/.opam/opam-init/init.fish > /dev/null 2> /dev/null; or true +'' diff --git a/home.nix b/home.nix index 6dd1958..fc7a91a 100644 --- a/home.nix +++ b/home.nix @@ -2,6 +2,7 @@ { /* The home.stateVersion option does not have a default and must be set */ home.stateVersion = "22.05"; + home.packages = with pkgs; [ firefox clojure @@ -28,168 +29,7 @@ programs.fish = { enable = true; - shellInit = '' - #### BEGIN ALIASES #### - alias v='nvim' - - alias vcf="v ~/.config/nvim/init.vim" - - alias vw='nvim ~/vimwiki/index.wiki; commit-vimwiki' - - function commit-vimwiki --description "go to and from the vimwiki directory, commit with message (to encourage uh, good stuff, and go back" - cd ~/vimwiki - git add * - git commit - prevd - end - - alias vt='nvim ~/vimwiki/Tasks.wiki' - - alias vwo="firefox ~/vimwiki_html/index.html" - alias vwr="nvim -c "VimwikiAll2HTML" -c "q" ~/vimwiki/index.wiki" - alias nv='neovide' - # alias hx='helix' - alias lv="~/.local/bin/lvim" - alias e='emacs' - alias ce='code .' - alias se="serve ." - alias co='code --reuse-window' - alias ok='okular' - alias ko='kitty .' - alias du="du -h --total" - - #exa - alias ls="exa" - alias tree="exa --tree -I target" - - # some more ls aliases - # alias ls='ls --color=always' - alias ll='ls -alF' - alias la='ls -a' - alias l='ls -CF' - - #some cargo aliases :) - alias c='cargo' - alias cn='cargo new' - alias cnl='cargo new --lib' - alias ci='cargo init' - alias cr='cargo run' - alias cb='cargo build' - alias ct='cargo test' - alias cv='cargo clippy' - alias cf='cargo flamegraph' - alias cff='cargo flamegraph;firefox flamegraph.svg' - alias cvp='cargo clippy -- -W clippy::pedantic' - alias cw="cargo watch -c --poll -x 'clippy -- -W clippy::pedantic'" - alias cwr='cargo watch -c -x run' - alias cwt='cargo watch -c -x test' - alias cbr='cargo build --release' - alias crr='cargo run --release' - alias crd="cargo rustdoc" - alias cft="cargo fmt" - alias cdc="cargo doc; firefox target/doc/settings.html" - - #general rust aliases - alias rft='rustfmt' - - #git aliases - alias g="git" - alias gcs="batcat -p -l bash /home/mehbark/main/misc/gitCliCheatSheet.js" - alias gco="git checkout" - alias gb="git branch" - alias gc="git commit -m" - alias gst="git status" - alias ga="git add" - alias gp="git push" - alias gl='git log --oneline --graph --decorate --all' - alias gi='git init' - - #more complex aliases - alias ri="git init; cargo init" - alias rn="new_cargo_quick" - alias ka="killall -r '.*'" - - function new_cargo_quick --description "make a cargo project with git version control, cd to it and open vscode" - mkdir "$argv[1]" - cd "$argv[1]" - git init - cargo init - code . - end - - function speed-up --description "take arg 1, speed it up by arg 3 and output it to arg 2" - echo "$argv[1]" - mencoder -o "$argv[2]" -speed "$argv[3]" -ovc lavc -oac lavc "$argv[1]" - end - - alias doom='~/.config/emacs/bin/doom' - alias pipers='pipes-rs' - alias yt='yt-dlp' - alias compile_and_serve="cargo run --quiet --release example_in example_out;cd example_out;serve;cd .." - alias icat="kitty +kitten icat" - - alias do="dolphin . &> /dev/null &" - - #homestuck - alias hnav "source /home/mbk/hs/bin/hsnav" - alias hstree "tree ~/hs" - alias codestuck "code ~/hs" - - function m - mkdir $argv[1] - cd $argv[1] - end - - function playflac - flac -c -d $argv | aplay - end - - function filelink - echo "file://$(realpath $argv)" - end - alias xpy '~/Aims/rust/x.py' - alias sbcl "rlwrap sbcl" - alias guile "rlwrap guile" - #alias clj 'clojure -Sdeps "{:deps {com.bhauman/rebel-readline {:mvn/version \"0.1.4\"} $args}}" -m rebel-readline.main' - alias csi "rlwrap chicken-csi" - - # zig - alias zb "zig build" - alias zbr "zig build run" - alias zbt "zig build test" - - # nix - alias nrb "sudo nixos-rebuild" - #### END ALIASES #### - export PATH="$HOME/.yarn/bin:$HOME/.config/yarn/global/node_modules/.bin:$HOME/.local/bin:$HOME/.emacs.d/bin:$PATH:$HOME/.ghcup/bin:$HOME/.cabal/bin:$HOME/hs/bin:$HOME/.cargo/bin:$HOME/.deno/bin:$HOME/Aims/curlfire" - - # [ -f ~/.fzf.bash ] && source ~/.fzf.bash - # setopt autocd - fish_vi_key_bindings - fish_vi_cursor - starship init fish | source - export RUSTC_FORCE_INCREMENTAL=1 - export EDITOR="nvim" - export TROLLNAMES_PATH="/home/mbk/hs/content/mine/trollname/6-letter-english-words.txt" - - set fish_greeting - - if status is-interactive - if set -q ASCIINEMA_REC - return - end - if test $PWD = "/home/mbk/hs" - homestartup - else - fortune | cowsay - end - end - - export CHEZSCHEMELIBDIRS="/home/mbk/Aims/chez/thunderchez:/home/mbk/Aims/chez/thunderchez:/home/mbk/Aims/chez/chez-srfi:/home/mbk/Aims/chez/pfds" - - # opam configuration - source /home/mbk/.opam/opam-init/init.fish > /dev/null 2> /dev/null; or true - ''; + shellInit = import ./fish.conf.nix; }; # programs.vscode = { @@ -256,373 +96,6 @@ zig-vim gruvbox ]; - extraConfig = '' - let mapleader = ";" - let maplocalleader = ";;" - - let g:ConqueGdb_GdbExe = 'arm-none-eabi-gdb' - - " call plug#begin('~/.config/nvim/plugged') - " " Using master branch - " call plug#end() - - - "===== Code Completion =====" - autocmd BufEnter * call ncm2#enable_for_buffer() - set completeopt=noinsert,menuone,noselect - " tab to select - " and don't hijack my enter key - inoremap (pumvisible()?(empty(v:completed_item)?"\":"\"):"\") - inoremap (pumvisible()?(empty(v:completed_item)?"\\":"\"):"\") - - "===== Compilation Error Navigation =====" - nmap (coc-diagnostic-next-error) - nmap (coc-diagnostic-next) - - - "===== Key bindings =====" - map :BufExplorer " Explore buffers - map :bnext " Next buffer! - map :bprev " Prev buffer! - map :Commentary " Toggle comment on this line - - map w :w - map q :q - - " mehbark added this, bracket and braces and stuff completion - " https://coderwall.com/p/h1dv0g/completion-for-parentheses-braces-and-brackets-in-vim - " inoremap { {} - " inoremap {{ { - " inoremap {} {} - " inoremap { {}O - " inoremap [ [] - " inoremap [[ [ - " inoremap [] [] - " inoremap ( () - " inoremap (( ( - " inoremap () () - " inoremap " "" - " inoremap "" "" - - "===== Airline =====" - set ttimeoutlen=50 - set laststatus=2 - let g:airline_powerline_fonts = 1 - let g:airline_theme='base16' - let g:airline#extensions#tabline#enabled = 1 - " let g:airline_left_sep="" - " let g:airline_right_sep="" - " let g:airline#extensions#whitespace#checks = [ 'indent' ] - - " Map f4 to switch header/source for c projects - map :A - - " remove trailing white spaces when saving - autocmd BufWritePre * :%s/\s\+$//e - - " OCaml settings - filetype indent on - filetype plugin on - - au BufRead,BufNewFile *.ml,*.mli compiler ocaml - - " different color schemes depending on the file type - syntax enable - "let g:rehash256 = 1 - colorscheme gruvbox - - - "===== NERDTree =====" - "Auto close if only NERDTree is open - autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif - - "Open nerd tree if no cl argument supplied - " function! StartUp() - " if 0 == argc() - " NERDTree . - " end - " endfunction - " let g:NERDTreeWinPos = 'right' - - " autocmd VimEnter * call StartUp() - - "toggle on Ctrl+n - map :NERDTreeToggle - - " let g:NERDTreeWinSize=60 - - - "===== Rust =====" - autocmd FileType rust nnoremap :RustFmt - let g:rustfmt_autosave = 1 - let g:rustfmt_command = "rustfmt" - au BufNewFile,BufRead *.rs setlocal colorcolumn=100 - let g:ycm_rust_src_path = '~/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src' - - - "===== Nvim Behaviour =====" - " Changes regular vim behaviours - " Set so the files auto updates when changed on disk - set autoread - - " No swap files - set backupdir-=. - set backupdir^=~/tmp,/tmp - - " Fold the code - set foldmethod=syntax - " activate the folder - set foldcolumn=1 - " automatically fold larger files, for small ones, it doesn't matter - autocmd! BufReadPost * :if line('$') < 200 | set foldlevel=99 | else | set foldlevel=1 |endif - " Relative line numbers in normal mode, absolute in insert (mainly for reading errors easier) - set number - - autocmd InsertEnter * :set norelativenumber - autocmd InsertLeave * :set relativenumber - - - "===== Persistent Undo =====" - " Keep undo history across sessions, by storing in file. - silent !mkdir ~/.config/nvim/backups > /dev/null 2>&1 - set undodir=~/.config/nvim/backups - set undofile - - - "===== Close current buffer =====" - nnoremap :BW - - - "===== Typo fixes =====" - "Fix common typos when saving and exiting - command WQ wq - command Wq wq - command W w - command Q q - - - "===== Misc =====" - set nocompatible - " Dont update view in scripts, 10000 times speedup - set lazyredraw - " set Colour support so airline works - set t_Co=256 - " set mouse activated - set mouse=a - set clipboard=unnamedplus - " Include stdlib dirs for 'gf' command. Also include all subdir in - " workingfolder - let &path.="src/include,/usr/include/AL,.**" - " Search for tags file, from current directory until home directory - set tags=./tags;$HOME - - - "===== Terminal =====" - " Set exiting term mode to esc esc - tnoremap - - - set incsearch - set ignorecase - set smartcase - set tabstop=4 shiftwidth=4 expandtab - set wrap linebreak nolist " list disables line break - " indicate where the 80 chars wide is - set cc=100 - set textwidth=0 - set wrapmargin=0 - " set spell spelllang=en_us - set number - set relativenumber - set langmenu=en_US - let $LANG = 'en_US' - set cursorline - " retain undo history in buffers - set hidden - " set so the files auto updates when changed on disk - set autoread - " Better default for yanking - :map Y y$ - " Set yank highlight to something reasonable - let g:highlightedyank_highlight_duration = 150 - - - """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" - "==== Haskell - """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" - let g:haskell_enable_quantification = 1 " to enable highlighting of `forall` - let g:haskell_enable_recursivedo = 1 " to enable highlighting of `mdo` and `rec` - let g:haskell_enable_arrowsyntax = 1 " to enable highlighting of `proc` - let g:haskell_enable_pattern_synonyms = 1 " to enable highlighting of `pattern` - let g:haskell_enable_typeroles = 1 " to enable highlighting of type roles - let g:haskell_enable_static_pointers = 1 " to enable highlighting of `static` - let g:haskell_backpack = 1 " to enable highlighting of backpack keywords - - """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" - "==== Coc settings - """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" - - " Give more space for displaying messages. - set cmdheight=2 - - " Having longer updatetime (default is 4000 ms = 4 s) leads to noticeable - " delays and poor user experience. - set updatetime=300 - - " Don't pass messages to |ins-completion-menu|. - set shortmess+=c - - " Always show the signcolumn, otherwise it would shift the text each time - " diagnostics appear/become resolved. - set signcolumn=yes - - "function! s:check_back_space() abort - " let col = col('.') - 1 - " return !col || getline('.')[col - 1] =~# '\s' - "endfunction - " - "" Use tab for trigger completion with characters ahead and navigate. - "" NOTE: Use command ':verbose imap ' to make sure tab is not mapped by - "" other plugin before putting this into your config. - "inoremap - " \ pumvisible() ? "\" : - " \ check_back_space() ? "\" : - " \ coc#refresh() - "inoremap pumvisible() ? "\" : "\" - - inoremap - \ coc#pum#visible() ? coc#pum#next(1) : - \ CheckBackspace() ? "\" : - \ coc#refresh() - inoremap coc#pum#visible() ? coc#pum#prev(1) : "\" - - function! CheckBackspace() abort - let col = col('.') - 1 - return !col || getline('.')[col - 1] =~# '\s' - endfunction - - " Make to accept selected completion item or notify coc.nvim to format - " u breaks current undo, please make your own choice. - inoremap coc#pum#visible() ? coc#pum#confirm() - \: "\u\\=coc#on_enter()\" - - " Use to trigger completion. - inoremap coc#refresh() - - " Use to confirm completion, `u` means break undo chain at current - " position. Coc only does snippet and additional edit on confirm. - " if has('patch8.1.1068') - " " Use `complete_info` if your (Neo)Vim version supports it. - " inoremap complete_info()["selected"] != "-1" ? "\" : "\u\" - " else - " imap pumvisible() ? "\" : "\u\" - " endif - - " Use `[g` and `]g` to navigate diagnostics - nmap [g (coc-diagnostic-prev) - nmap ]g (coc-diagnostic-next) - - " GoTo code navigation. - nmap gd (coc-definition) - nmap gy (coc-type-definition) - nmap gi (coc-implementation) - nmap gr (coc-references) - - " Use K to show documentation in preview window. - nnoremap K :call show_documentation() - - let g:sexp_insert_after_wrap = 0 - - function! s:show_documentation() - if (index(['vim','help'], &filetype) >= 0) - execute 'h '.expand('') - else - call CocAction('doHover') - endif - endfunction - - " Highlight the symbol and its references when holding the cursor. - autocmd CursorHold * silent call CocActionAsync('highlight') - - " Symbol renaming. - nmap rn (coc-rename) - - " Formatting selected code. - xmap f (coc-format-selected) - nmap f (coc-format-selected) - - augroup mygroup - autocmd! - " Setup formatexpr specified filetype(s). - autocmd FileType typescript,json setl formatexpr=CocAction('formatSelected') - " Update signature help on jump placeholder. - autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp') - augroup end - - " Applying codeAction to the selected region. - " Example: `aap` for current paragraph - xmap a (coc-codeaction-selected) - nmap a (coc-codeaction-selected) - - " Remap keys for applying codeAction to the current line. - nmap ac (coc-codeaction) - " Apply AutoFix to problem on the current line. - nmap qf (coc-fix-current) - - " Introduce function text object - " NOTE: Requires 'textDocument.documentSymbol' support from the language server. - xmap if (coc-funcobj-i) - xmap af (coc-funcobj-a) - omap if (coc-funcobj-i) - omap af (coc-funcobj-a) - - " Use for selections ranges. - " NOTE: Requires 'textDocument/selectionRange' support from the language server. - " coc-tsserver, coc-python are the examples of servers that support it. - nmap (coc-range-select) - xmap (coc-range-select) - - " Add `:Format` command to format current buffer. - command! -nargs=0 Format :call CocAction('format') - - " Add `:Fold` command to fold current buffer. - command! -nargs=? Fold :call CocAction('fold', ) - - " Add `:OR` command for organize imports of the current buffer. - command! -nargs=0 OR :call CocAction('runCommand', 'editor.action.organizeImport') - - let g:airline#extensions#coc#enabled = 1 - " Add (Neo)Vim's native statusline support. - " NOTE: Please see `:h coc-status` for integrations with external plugins that - " provide custom statusline: lightline.vim, vim-airline. - set statusline^=%{coc#status()}%{get(b:,'coc_current_function',''')} - - " hopefully this fixes the weird thing with the working directory being a - " parent directory - " it hasn't, yet - set autochdir - - " Mappings using CoCList: - " Show all diagnostics. - " nnoremap a :CocList diagnostics - " Manage extensions. - " nnoremap e :CocList extensions - " Show commands. - " nnoremap c :CocList commands - " Find symbol of current document. - " nnoremap o :CocList outline - " Search workspace symbols. - " nnoremap s :CocList -I symbols - " Do default action for next item. - " nnoremap j :CocNext - " Do default action for previous item. - " nnoremap k :CocPrev - " Resume latest coc list. - " nnoremap p :CocListResume - - """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" - " / Coc settings - """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" - ''; + extraConfig = import ./nvim.conf.nix; }; } diff --git a/kitty.conf.nix b/kitty.conf.nix new file mode 100644 index 0000000..a6c0cfb --- /dev/null +++ b/kitty.conf.nix @@ -0,0 +1,2094 @@ +'' +# vim:fileencoding=utf-8:foldmethod=marker + +#: Fonts {{{ + +#: kitty has very powerful font management. You can configure +#: individual font faces and even specify special fonts for particular +#: characters. + +font_family JetBrainsMono Nerd Font +# bold_font auto +# italic_font auto +# bold_italic_font auto + +#: You can specify different fonts for the bold/italic/bold-italic +#: variants. To get a full list of supported fonts use the `kitty +#: list-fonts` command. By default they are derived automatically, by +#: the OSes font system. When bold_font or bold_italic_font is set to +#: auto on macOS, the priority of bold fonts is semi-bold, bold, +#: heavy. Setting them manually is useful for font families that have +#: many weight variants like Book, Medium, Thick, etc. For example:: + +#: font_family Operator Mono Book +#: bold_font Operator Mono Medium +#: italic_font Operator Mono Book Italic +#: bold_italic_font Operator Mono Medium Italic + +font_size 11.0 + +#: Font size (in pts) + +# force_ltr no + +#: kitty does not support BIDI (bidirectional text), however, for RTL +#: scripts, words are automatically displayed in RTL. That is to say, +#: in an RTL script, the words "HELLO WORLD" display in kitty as +#: "WORLD HELLO", and if you try to select a substring of an RTL- +#: shaped string, you will get the character that would be there had +#: the the string been LTR. For example, assuming the Hebrew word +#: ירושלים, selecting the character that on the screen appears to be ם +#: actually writes into the selection buffer the character י. kitty's +#: default behavior is useful in conjunction with a filter to reverse +#: the word order, however, if you wish to manipulate RTL glyphs, it +#: can be very challenging to work with, so this option is provided to +#: turn it off. Furthermore, this option can be used with the command +#: line program GNU FriBidi +#: to get BIDI +#: support, because it will force kitty to always treat the text as +#: LTR, which FriBidi expects for terminals. + +# adjust_line_height 1 +# adjust_column_width 0 + +#: Change the size of each character cell kitty renders. You can use +#: either numbers, which are interpreted as pixels or percentages +#: (number followed by %), which are interpreted as percentages of the +#: unmodified values. You can use negative pixels or percentages less +#: than 100% to reduce sizes (but this might cause rendering +#: artifacts). + +# adjust_baseline 0 + +#: Adjust the vertical alignment of text (the height in the cell at +#: which text is positioned). You can use either numbers, which are +#: interpreted as pixels or a percentages (number followed by %), +#: which are interpreted as the percentage of the line height. A +#: positive value moves the baseline up, and a negative value moves +#: them down. The underline and strikethrough positions are adjusted +#: accordingly. + +# symbol_map + +#: E.g. symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols + +#: Map the specified unicode codepoints to a particular font. Useful +#: if you need special rendering for some symbols, such as for +#: Powerline. Avoids the need for patched fonts. Each unicode code +#: point is specified in the form U+. You +#: can specify multiple code points, separated by commas and ranges +#: separated by hyphens. symbol_map itself can be specified multiple +#: times. Syntax is:: + +#: symbol_map codepoints Font Family Name +# symbol_map U+1F600-U+1F64F,U+1F4E6,U+1F980 Noto Emoji + +disable_ligatures never + +#: Choose how you want to handle multi-character ligatures. The +#: default is to always render them. You can tell kitty to not render +#: them when the cursor is over them by using cursor to make editing +#: easier, or have kitty never render them at all by using always, if +#: you don't like them. The ligature strategy can be set per-window +#: either using the kitty remote control facility or by defining +#: shortcuts for it in kitty.conf, for example:: + +#: map alt+1 disable_ligatures_in active always +#: map alt+2 disable_ligatures_in all never +#: map alt+3 disable_ligatures_in tab cursor + +#: Note that this refers to programming ligatures, typically +#: implemented using the calt OpenType feature. For disabling general +#: ligatures, use the font_features setting. + +# font_features + +#: E.g. font_features none + +#: Choose exactly which OpenType features to enable or disable. This +#: is useful as some fonts might have features worthwhile in a +#: terminal. For example, Fira Code Retina includes a discretionary +#: feature, zero, which in that font changes the appearance of the +#: zero (0), to make it more easily distinguishable from Ø. Fira Code +#: Retina also includes other discretionary features known as +#: Stylistic Sets which have the tags ss01 through ss20. + +#: For the exact syntax to use for individual features, see the +#: Harfbuzz documentation . + +#: Note that this code is indexed by PostScript name, and not the font +#: family. This allows you to define very precise feature settings; +#: e.g. you can disable a feature in the italic font but not in the +#: regular font. + +#: On Linux, these are read from the FontConfig database first and +#: then this, setting is applied, so they can be configured in a +#: single, central place. + +#: To get the PostScript name for a font, use kitty + list-fonts +#: --psnames: + +#: .. code-block:: sh + +#: $ kitty + list-fonts --psnames | grep Fira +#: Fira Code +#: Fira Code Bold (FiraCode-Bold) +#: Fira Code Light (FiraCode-Light) +#: Fira Code Medium (FiraCode-Medium) +#: Fira Code Regular (FiraCode-Regular) +#: Fira Code Retina (FiraCode-Retina) + +#: The part in brackets is the PostScript name. + +#: Enable alternate zero and oldstyle numerals:: + +#: font_features FiraCode-Retina +zero +onum + +#: Enable only alternate zero:: + +#: font_features FiraCode-Retina +zero + +#: Disable the normal ligatures, but keep the calt feature which (in +#: this font) breaks up monotony:: + +#: font_features TT2020StyleB-Regular -liga +calt + +#: In conjunction with force_ltr, you may want to disable Arabic +#: shaping entirely, and only look at their isolated forms if they +#: show up in a document. You can do this with e.g.:: + +#: font_features UnifontMedium +isol -medi -fina -init + +# box_drawing_scale 0.001, 1, 1.5, 2 + +#: Change the sizes of the lines used for the box drawing unicode +#: characters These values are in pts. They will be scaled by the +#: monitor DPI to arrive at a pixel value. There must be four values +#: corresponding to thin, normal, thick, and very thick lines. + +#: }}} + +#: Cursor customization {{{ + +# cursor #cccccc + +#: Default cursor color. If set to the special value none the cursor +#: will be rendered with a "reverse video" effect. It's color will be +#: the color of the text in the cell it is over and the text will be +#: rendered with the background color of the cell. Note that if the +#: program running in the terminal sets a cursor color, this takes +#: precedence. Also, the cursor colors are modified if the cell +#: background and foreground colors have very low contrast. + +# cursor_text_color #111111 + +#: Choose the color of text under the cursor. If you want it rendered +#: with the background color of the cell underneath instead, use the +#: special keyword: background. Note that if cursor is set to none +#: then this setting is ignored. + +# cursor_shape block + +#: The cursor shape can be one of (block, beam, underline). Note that +#: when reloading the config this will be changed only if the cursor +#: shape has not been set by the program running in the terminal. This +#: sets the default cursor shape. Applications running in the terminal +#: can override it. In particular, +#: https://sw.kovidgoyal.net/kitty/shell-integration/ in kitty sets +#: the cursor shape to beam at shell prompts. You can avoid this by +#: setting shell_integration to no-cursor. + +cursor_beam_thickness 1.0 + +#: Defines the thickness of the beam cursor (in pts) + +cursor_underline_thickness 1.0 + +#: Defines the thickness of the underline cursor (in pts) + +cursor_blink_interval -1 + +#: The interval (in seconds) at which to blink the cursor. Set to zero +#: to disable blinking. Negative values mean use system default. Note +#: that numbers smaller than repaint_delay will be limited to +#: repaint_delay. + +# cursor_stop_blinking_after 15.0 + +#: Stop blinking cursor after the specified number of seconds of +#: keyboard inactivity. Set to zero to never stop blinking. + +#: }}} + +#: Scrollback {{{ + +# scrollback_lines 2000 + +#: Number of lines of history to keep in memory for scrolling back. +#: Memory is allocated on demand. Negative numbers are (effectively) +#: infinite scrollback. Note that using very large scrollback is not +#: recommended as it can slow down performance of the terminal and +#: also use large amounts of RAM. Instead, consider using +#: scrollback_pager_history_size. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER + +#: Program with which to view scrollback in a new window. The +#: scrollback buffer is passed as STDIN to this program. If you change +#: it, make sure the program you use can handle ANSI escape sequences +#: for colors and text formatting. INPUT_LINE_NUMBER in the command +#: line above will be replaced by an integer representing which line +#: should be at the top of the screen. Similarly CURSOR_LINE and +#: CURSOR_COLUMN will be replaced by the current cursor position or +#: set to 0 if there is no cursor, for example, when showing the last +#: command output. + +# scrollback_pager_history_size 0 + +#: Separate scrollback history size, used only for browsing the +#: scrollback buffer (in MB). This separate buffer is not available +#: for interactive scrolling but will be piped to the pager program +#: when viewing scrollback buffer in a separate window. The current +#: implementation stores the data in UTF-8, so approximatively 10000 +#: lines per megabyte at 100 chars per line, for pure ASCII text, +#: unformatted text. A value of zero or less disables this feature. +#: The maximum allowed size is 4GB. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_fill_enlarged_window no + +#: Fill new space with lines from the scrollback buffer after +#: enlarging a window. + +# wheel_scroll_multiplier 5.0 + +#: Modify the amount scrolled by the mouse wheel. Note this is only +#: used for low precision scrolling devices, not for high precision +#: scrolling on platforms such as macOS and Wayland. Use negative +#: numbers to change scroll direction. + +# touch_scroll_multiplier 1.0 + +#: Modify the amount scrolled by a touchpad. Note this is only used +#: for high precision scrolling devices on platforms such as macOS and +#: Wayland. Use negative numbers to change scroll direction. + +#: }}} + +#: Mouse {{{ + +# mouse_hide_wait 3.0 + +#: Hide mouse cursor after the specified number of seconds of the +#: mouse not being used. Set to zero to disable mouse cursor hiding. +#: Set to a negative value to hide the mouse cursor immediately when +#: typing text. Disabled by default on macOS as getting it to work +#: robustly with the ever-changing sea of bugs that is Cocoa is too +#: much effort. + +# url_color #0087bd +url_style straight + +#: The color and style for highlighting URLs on mouse-over. url_style +#: can be one of: none, straight, double, curly, dotted, dashed + +# open_url_with default + +#: The program with which to open URLs that are clicked on. The +#: special value default means to use the operating system's default +#: URL handler (open on macOS and xdg-open on Linux). + +# url_prefixes http https file ftp gemini irc gopher mailto news git + +#: The set of URL prefixes to look for when detecting a URL under the +#: mouse cursor. + +# detect_urls yes + +#: Detect URLs under the mouse. Detected URLs are highlighted with an +#: underline and the mouse cursor becomes a hand over them. Even if +#: this option is disabled, URLs are still clickable. + +# url_excluded_characters + +#: Additional characters to be disallowed from URLs, when detecting +#: URLs under the mouse cursor. By default, all characters legal in +#: URLs are allowed. + +# copy_on_select no + +#: Copy to clipboard or a private buffer on select. With this set to +#: clipboard, simply selecting text with the mouse will cause the text +#: to be copied to clipboard. Useful on platforms such as macOS that +#: do not have the concept of primary selections. You can instead +#: specify a name such as a1 to copy to a private kitty buffer +#: instead. Map a shortcut with the paste_from_buffer action to paste +#: from this private buffer. For example:: + +#: map shift+cmd+v paste_from_buffer a1 + +#: Note that copying to the clipboard is a security risk, as all +#: programs, including websites open in your browser can read the +#: contents of the system clipboard. + +# strip_trailing_spaces never + +#: Remove spaces at the end of lines when copying to clipboard. A +#: value of smart will do it when using normal selections, but not +#: rectangle selections. always will always do it. + +# select_by_word_characters @-./_~?&=%+# + +#: Characters considered part of a word when double clicking. In +#: addition to these characters any character that is marked as an +#: alphanumeric character in the unicode database will be matched. + +# click_interval -1.0 + +#: The interval between successive clicks to detect double/triple +#: clicks (in seconds). Negative numbers will use the system default +#: instead, if available, or fallback to 0.5. + +# focus_follows_mouse no + +#: Set the active window to the window under the mouse when moving the +#: mouse around + +# pointer_shape_when_grabbed arrow + +#: The shape of the mouse pointer when the program running in the +#: terminal grabs the mouse. Valid values are: arrow, beam and hand + +# default_pointer_shape beam + +#: The default shape of the mouse pointer. Valid values are: arrow, +#: beam and hand + +# pointer_shape_when_dragging beam + +#: The default shape of the mouse pointer when dragging across text. +#: Valid values are: arrow, beam and hand + +#: Mouse actions {{{ + +#: Mouse buttons can be remapped to perform arbitrary actions. The +#: syntax for doing so is: + +#: .. code-block:: none + +#: mouse_map button-name event-type modes action + +#: Where ``button-name`` is one of ``left``, ``middle``, ``right`` or +#: ``b1 ... b8`` with added keyboard modifiers, for example: +#: ``ctrl+shift+left`` refers to holding the ctrl+shift keys while +#: clicking with the left mouse button. The number ``b1 ... b8`` can +#: be used to refer to upto eight buttons on a mouse. + +#: ``event-type`` is one ``press``, ``release``, ``doublepress``, +#: ``triplepress``, ``click`` and ``doubleclick``. ``modes`` +#: indicates whether the action is performed when the mouse is grabbed +#: by the program running in the terminal, or not. It can have one or +#: more or the values, ``grabbed,ungrabbed``. ``grabbed`` refers to +#: when the program running in the terminal has requested mouse +#: events. Note that the click and double click events have a delay of +#: click_interval to disambiguate from double and triple presses. + +#: You can run kitty with the kitty --debug-input command line option +#: to see mouse events. See the builtin actions below to get a sense +#: of what is possible. + +#: If you want to unmap an action map it to ``no-op``. For example, to +#: disable opening of URLs with a plain click:: + +#: mouse_map left click ungrabbed no-op + +#: .. note:: +#: Once a selection is started, releasing the button that started it will +#: automatically end it and no release event will be dispatched. + +# clear_all_mouse_actions no + +#: You can have kitty remove all mouse actions seen up to this point. +#: Useful, for instance, to remove the default mouse actions. + +#: Click the link under the mouse or move the cursor + +# mouse_map left click ungrabbed mouse_handle_click selection link prompt + +#:: First check for a selection and if one exists do nothing. Then +#:: check for a link under the mouse cursor and if one exists, click +#:: it. Finally check if the click happened at the current shell +#:: prompt and if so, move the cursor to the click location. Note +#:: that this requires shell-integration to work. + +#: Click the link under the mouse or move the cursor even when grabbed + +# mouse_map shift+left click grabbed,ungrabbed mouse_handle_click selection link prompt + +#:: Same as above, except that the action is performed even when the +#:: mouse is grabbed by the program running in the terminal. + +#: Click the link under the mouse cursor + +# mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_handle_click link + +#:: Variant with ctrl+shift is present because the simple click based +#:: version has an unavoidable delay of click_interval, to +#:: disambiguate clicks from double clicks. + +#: Discard press event for link click + +# mouse_map ctrl+shift+left press grabbed discard_event + +#:: Prevent this press event from being sent to the program that has +#:: grabbed the mouse, as the corresponding release event is used to +#:: open a URL. + +#: Paste from the primary selection + +# mouse_map middle release ungrabbed paste_from_selection + +#: Start selecting text + +# mouse_map left press ungrabbed mouse_selection normal + +#: Start selecting text in a rectangle + +# mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle + +#: Select a word + +# mouse_map left doublepress ungrabbed mouse_selection word + +#: Select a line + +# mouse_map left triplepress ungrabbed mouse_selection line + +#:: Select the entire line + +#: Select line from point + +# mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point + +#:: Select from the clicked point to the end of the line + +#: Extend the current selection + +# mouse_map right press ungrabbed mouse_selection extend + +#:: If you want only the end of the selection to be moved instead of +#:: the nearest boundary, use move-end instead of extend. + +#: Paste from the primary selection even when grabbed + +# mouse_map shift+middle release ungrabbed,grabbed paste_selection +# mouse_map shift+middle press grabbed discard_event + +#: Start selecting text even when grabbed + +# mouse_map shift+left press ungrabbed,grabbed mouse_selection normal + +#: Start selecting text in a rectangle even when grabbed + +# mouse_map ctrl+shift+alt+left press ungrabbed,grabbed mouse_selection rectangle + +#: Select a word even when grabbed + +# mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word + +#: Select a line even when grabbed + +# mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line + +#:: Select the entire line + +#: Select line from point even when grabbed + +# mouse_map ctrl+shift+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point + +#:: Select from the clicked point to the end of the line + +#: Extend the current selection even when grabbed + +# mouse_map shift+right press ungrabbed,grabbed mouse_selection extend + +#: Show clicked command output in pager + +# mouse_map ctrl+shift+right press ungrabbed mouse_show_command_output + +#:: Requires https://sw.kovidgoyal.net/kitty/shell-integration/ to +#:: work + +#: }}} + +#: }}} + +#: Performance tuning {{{ + +# repaint_delay 10 + +#: Delay (in milliseconds) between screen updates. Decreasing it, +#: increases frames-per-second (FPS) at the cost of more CPU usage. +#: The default value yields ~100 FPS which is more than sufficient for +#: most uses. Note that to actually achieve 100 FPS you have to either +#: set sync_to_monitor to no or use a monitor with a high refresh +#: rate. Also, to minimize latency when there is pending input to be +#: processed, repaint_delay is ignored. + +# input_delay 3 + +#: Delay (in milliseconds) before input from the program running in +#: the terminal is processed. Note that decreasing it will increase +#: responsiveness, but also increase CPU usage and might cause flicker +#: in full screen programs that redraw the entire screen on each loop, +#: because kitty is so fast that partial screen updates will be drawn. + +# sync_to_monitor yes + +#: Sync screen updates to the refresh rate of the monitor. This +#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) +#: when scrolling. However, it limits the rendering speed to the +#: refresh rate of your monitor. With a very high speed mouse/high +#: keyboard repeat rate, you may notice some slight input latency. If +#: so, set this to no. + +#: }}} + +#: Terminal bell {{{ + +enable_audio_bell no + +#: Enable/disable the audio bell. Useful in environments that require +#: silence. + +# visual_bell_duration 0.0 + +#: Visual bell duration. Flash the screen when a bell occurs for the +#: specified number of seconds. Set to zero to disable. + +# visual_bell_color none + +#: The color used by visual bell. Set to none will fall back to +#: selection background color. If you feel that the visual bell is too +#: bright, you can set it to a darker color. + +# window_alert_on_bell yes + +#: Request window attention on bell. Makes the dock icon bounce on +#: macOS or the taskbar flash on linux. + +bell_on_tab "🔔 " + +#: Some text or a unicode symbol to show on the tab if a window in the +#: tab that does not have focus has a bell. If you want to use leading +#: or trailing spaces surround the text with quotes. See +#: tab_title_template for how this is rendered. + +#: For backwards compatibility, values of yes, y, true are converted +#: to the default bell symbol and no, n, false, none are converted to +#: the empty string. + +# command_on_bell none + +#: Program to run when a bell occurs. The environment variable +#: KITTY_CHILD_CMDLINE can be used to get the program running in the +#: window in which the bell occurred. + +# bell_path none + +#: Path to a sound file to play as the bell sound. If set to none, the +#: system default bell sound is used. Must be in a format supported by +#: the operating systems sound API, such as WAV or OGA on Linux +#: (libcanberra) or AIFF, MP3 or WAV on macOS (NSSound) + +#: }}} + +#: Window layout {{{ + +# remember_window_size yes +# initial_window_width 640 +# initial_window_height 400 + +#: If enabled, the window size will be remembered so that new +#: instances of kitty will have the same size as the previous +#: instance. If disabled, the window will initially have size +#: configured by initial_window_width/height, in pixels. You can use a +#: suffix of "c" on the width/height values to have them interpreted +#: as number of cells instead of pixels. + +# enabled_layouts * +enabled_layouts horizontal,vertical + +#: The enabled window layouts. A comma separated list of layout names. +#: The special value all means all layouts. The first listed layout +#: will be used as the startup layout. Default configuration is all +#: layouts in alphabetical order. For a list of available layouts, see +#: the https://sw.kovidgoyal.net/kitty/overview/#layouts. + +# window_resize_step_cells 2 +# window_resize_step_lines 2 + +#: The step size (in units of cell width/cell height) to use when +#: resizing kitty windows in a layout with the keyboard +#: (start_resizing_window). The cells value is used for horizontal +#: resizing and the lines value for vertical resizing. + +# window_border_width 0.5pt + +#: The width of window borders. Can be either in pixels (px) or pts +#: (pt). Values in pts will be rounded to the nearest number of pixels +#: based on screen resolution. If not specified the unit is assumed to +#: be pts. Note that borders are displayed only when more than one +#: window is visible. They are meant to separate multiple windows. + +# draw_minimal_borders yes + +#: Draw only the minimum borders needed. This means that only the +#: minimum needed borders for inactive windows are drawn. That is only +#: the borders that separate the inactive window from a neighbor. Note +#: that setting a non-zero window margin overrides this and causes all +#: borders to be drawn. + +window_margin_width 6 + +#: The window margin (in pts) (blank area outside the border). A +#: single value sets all four sides. Two values set the vertical and +#: horizontal sides. Three values set top, horizontal and bottom. Four +#: values set top, right, bottom and left. + +# single_window_margin_width -1 + +#: The window margin (in pts) to use when only a single window is +#: visible. Negative values will cause the value of +#: window_margin_width to be used instead. A single value sets all +#: four sides. Two values set the vertical and horizontal sides. Three +#: values set top, horizontal and bottom. Four values set top, right, +#: bottom and left. + +# window_padding_width 0 + +#: The window padding (in pts) (blank area between the text and the +#: window border). A single value sets all four sides. Two values set +#: the vertical and horizontal sides. Three values set top, horizontal +#: and bottom. Four values set top, right, bottom and left. + +# placement_strategy center + +#: When the window size is not an exact multiple of the cell size, the +#: cell area of the terminal window will have some extra padding on +#: the sides. You can control how that padding is distributed with +#: this option. Using a value of center means the cell area will be +#: placed centrally. A value of top-left means the padding will be on +#: only the bottom and right edges. + +# active_border_color #00ff00 + +#: The color for the border of the active window. Set this to none to +#: not draw borders around the active window. + +# inactive_border_color #cccccc + +#: The color for the border of inactive windows + +# bell_border_color #ff5a00 + +#: The color for the border of inactive windows in which a bell has +#: occurred + +# inactive_text_alpha 1.0 + +#: Fade the text in inactive windows by the specified amount (a number +#: between zero and one, with zero being fully faded). + +# hide_window_decorations no + +#: Hide the window decorations (title-bar and window borders) with +#: yes. On macOS, titlebar-only can be used to only hide the titlebar. +#: Whether this works and exactly what effect it has depends on the +#: window manager/operating system. Note that the effects of changing +#: this setting when reloading config are undefined. + +# window_logo_path none + +#: Path to a logo image. Must be in PNG format. Relative paths are +#: interpreted relative to the kitty config directory. The logo is +#: displayed in a corner of every kitty window. The position is +#: controlled by window_logo_position. Individual windows can be +#: configured to have different logos either using the launch function +#: or the remote-control facility. + +# window_logo_position bottom-right + +#: Where to position the window logo in the window. The value can be +#: one of: top-left, top, top-right, left, center, right, bottom-left, +#: bottom, bottom-right. + +# window_logo_alpha 0.5 + +#: The amount the logo should be faded into the background. With zero +#: being fully faded and one being fully opaque. + +# resize_debounce_time 0.1 + +#: The time (in seconds) to wait before redrawing the screen when a +#: resize event is received. On platforms such as macOS, where the +#: operating system sends events corresponding to the start and end of +#: a resize, this number is ignored. + +# resize_draw_strategy static + +#: Choose how kitty draws a window while a resize is in progress. A +#: value of static means draw the current window contents, mostly +#: unchanged. A value of scale means draw the current window contents +#: scaled. A value of blank means draw a blank window. A value of size +#: means show the window size in cells. + +# resize_in_steps no + +#: Resize the OS window in steps as large as the cells, instead of +#: with the usual pixel accuracy. Combined with an +#: initial_window_width and initial_window_height in number of cells, +#: this option can be used to keep the margins as small as possible +#: when resizing the OS window. Note that this does not currently work +#: on Wayland. + +# visual_window_select_characters 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZ + +#: The list of characters to use for visual window selection (for +#: example for selecting a window to focus with focus_visible_window). +#: The value should be a series of unique numbers or alphabets, case +#: insensitive, from the set [0-9A-Z]. Specify your preference as a +#: string of characters. + +# confirm_os_window_close 0 + +#: Ask for confirmation when closing an OS window or a Tab with at +#: least this number of kitty windows in it by window manager (e.g. +#: clicking the window close button or pressing the Operating system +#: shortcut to close windows) or by the close_tab action. A value of +#: zero disables confirmation. This confirmation also applies to +#: requests to quit the entire application (all OS windows, via the +#: quit action). Negative values are converted to positive ones, +#: however, with https://sw.kovidgoyal.net/kitty/shell-integration/ +#: enabled, using negative values means windows sitting at a shell +#: prompt are not counted, only windows where some command is +#: currently running. Note that if you want confirmation when closing +#: individual windows, you can map the +#: https://sw.kovidgoyal.net/kitty/actions/#close-window-with- +#: confirmation action. + +#: }}} + +#: Tab bar {{{ + +# tab_bar_edge bottom + +#: Which edge to show the tab bar on, top or bottom + +# tab_bar_margin_width 0.0 + +#: The margin to the left and right of the tab bar (in pts) + +# tab_bar_margin_height 0.0 0.0 + +#: The margin above and below the tab bar (in pts). The first number +#: is the margin between the edge of the OS Window and the tab bar and +#: the second number is the margin between the tab bar and the +#: contents of the current tab. + +tab_bar_style powerline + +#: The tab bar style, can be one of: + +#: fade +#: Each tab's edges fade into the background color (see tab_fade) +#: slant +#: Tabs look like the tabs in a physical file +#: separator +#: Tabs are separated by a configurable separator (see tab_separator) +#: powerline +#: Tabs are shown as a continuous line with "fancy" separators +#: (see tab_powerline_style) +#: custom +#: A user-supplied Python function called draw_tab is loaded from the file +#: tab_bar.py in the kitty config directory. For examples of how to +#: write such a function, see the functions named draw_tab_with_* in +#: kitty's source code: kitty/tab_bar.py. See also +#: this discussion <4447> for examples from kitty users. +#: hidden +#: The tab bar is hidden. If you use this, you might want to create a +#: mapping for the https://sw.kovidgoyal.net/kitty/actions/#select-tab +#: action which presents you with a list of tabs and allows for easy +#: switching to a tab. + +# tab_bar_align left + +#: The horizontal alignment of the tab bar, can be one of: left, +#: center, or right. + +# tab_bar_min_tabs 2 + +#: The minimum number of tabs that must exist before the tab bar is +#: shown + +# tab_switch_strategy previous + +#: The algorithm to use when switching to a tab when the current tab +#: is closed. The default of previous will switch to the last used +#: tab. A value of left will switch to the tab to the left of the +#: closed tab. A value of right will switch to the tab to the right of +#: the closed tab. A value of last will switch to the right-most tab. + +# tab_fade 0.25 0.5 0.75 1 + +#: Control how each tab fades into the background when using fade for +#: the tab_bar_style. Each number is an alpha (between zero and one) +#: that controls how much the corresponding cell fades into the +#: background, with zero being no fade and one being full fade. You +#: can change the number of cells used by adding/removing entries to +#: this list. + +# tab_separator " ┇" + +#: The separator between tabs in the tab bar when using separator as +#: the tab_bar_style. + +# tab_powerline_style angled + +#: The powerline separator style between tabs in the tab bar when +#: using powerline as the tab_bar_style, can be one of: angled, +#: slanted, or round. + +# tab_activity_symbol none + +#: Some text or a unicode symbol to show on the tab if a window in the +#: tab that does not have focus has some activity. If you want to use +#: leading or trailing spaces surround the text with quotes. See +#: tab_title_template for how this is rendered. + +# tab_title_template "{fmt.fg.red}{bell_symbol}{activity_symbol}{fmt.fg.default}{title}" + +#: A template to render the tab title. The default just renders the +#: title with optional symbols for bell and activity. If you wish to +#: include the tab-index as well, use something like: {index}: +#: {title}. Useful if you have shortcuts mapped for goto_tab N. If you +#: prefer to see the index as a superscript, use {sup.index}. In +#: addition you can use {layout_name} for the current layout name, +#: {num_windows} for the number of windows in the tab and +#: {num_window_groups} for the number of window groups (not counting +#: overlay windows) in the tab. Note that formatting is done by +#: Python's string formatting machinery, so you can use, for instance, +#: {layout_name[:2].upper()} to show only the first two letters of the +#: layout name, upper-cased. If you want to style the text, you can +#: use styling directives, for example: +#: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green +#: bg{fmt.bg.tab}. Similarly, for bold and italic: +#: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}. +#: Note that for backward compatibility, if {bell_symbol} or +#: {activity_symbol} are not present in the template, they are +#: prepended to it. + +# active_tab_title_template none + +#: Template to use for active tabs, if not specified falls back to +#: tab_title_template. + +# active_tab_foreground #000 +# active_tab_background #eee +# active_tab_font_style bold-italic +# inactive_tab_foreground #444 +# inactive_tab_background #999 +# inactive_tab_font_style normal + +#: Tab bar colors and styles + +# tab_bar_background none + +#: Background color for the tab bar. Defaults to using the terminal +#: background color. + +# tab_bar_margin_color none + +#: Color for the tab bar margin area. Defaults to using the terminal +#: background color. + +#: }}} + +#: Color scheme {{{ + +# foreground #dddddd +# background #000000 + +#: The foreground and background colors + +# background_opacity 0.8 + +#: The opacity of the background. A number between 0 and 1, where 1 is +#: opaque and 0 is fully transparent. This will only work if +#: supported by the OS (for instance, when using a compositor under +#: X11). Note that it only sets the background color's opacity in +#: cells that have the same background color as the default terminal +#: background. This is so that things like the status bar in vim, +#: powerline prompts, etc. still look good. But it means that if you +#: use a color theme with a background color in your editor, it will +#: not be rendered as transparent. Instead you should change the +#: default background color in your kitty config and not use a +#: background color in the editor color scheme. Or use the escape +#: codes to set the terminals default colors in a shell script to +#: launch your editor. Be aware that using a value less than 1.0 is a +#: (possibly significant) performance hit. If you want to dynamically +#: change transparency of windows set dynamic_background_opacity to +#: yes (this is off by default as it has a performance cost). Changing +#: this setting when reloading the config will only work if +#: dynamic_background_opacity was enabled in the original config. + +# background_image none + +#: Path to a background image. Must be in PNG format. + +# background_image_layout tiled + +#: Whether to tile, scale or clamp the background image. The value can +#: be one of tiled, mirror-tiled, scaled, clamped. + +# background_image_linear no + +#: When background image is scaled, whether linear interpolation +#: should be used. + +# dynamic_background_opacity no + +#: Allow changing of the background_opacity dynamically, using either +#: keyboard shortcuts (increase_background_opacity and +#: decrease_background_opacity) or the remote control facility. +#: Changing this setting by reloading the config is not supported. + +# background_tint 0.0 + +#: How much to tint the background image by the background color. The +#: tint is applied only under the text area, not margin/borders. Makes +#: it easier to read the text. Tinting is done using the current +#: background color for each window. This setting applies only if +#: background_opacity is set and transparent windows are supported or +#: background_image is set. + +# dim_opacity 0.75 + +#: How much to dim text that has the DIM/FAINT attribute set. One +#: means no dimming and zero means fully dimmed (i.e. invisible). + +# selection_foreground #000000 +# selection_background #fffacd + +#: The foreground and background colors for text selected with the +#: mouse. Setting both of these to none will cause a "reverse video" +#: effect for selections, where the selection will be the cell text +#: color and the text will become the cell background color. Setting +#: only selection_foreground to none will cause the foreground color +#: to be used unchanged. Note that these colors can be overridden by +#: the program running in the terminal. + +#: The color table {{{ + +#: The 256 terminal colors. There are 8 basic colors, each color has a +#: dull and bright version, for the first 16 colors. You can set the +#: remaining 240 colors as color16 to color255. + +# gruvbox-dark colorscheme for kitty +# snazzy theme used as base + +foreground #ebdbb2 +background #272727 +selection_foreground #655b53 +selection_background #ebdbb2 +url_color #d65c0d + +# black +color0 #272727 +color8 #928373 + +# red +color1 #cc231c +color9 #fb4833 + +# green +color2 #989719 +color10 #b8ba25 + +# yellow +color3 #d79920 +color11 #fabc2e + +# blue +color4 #448488 +color12 #83a597 + +# magenta +color5 #b16185 +color13 #d3859a + +# cyan +color6 #689d69 +color14 #8ec07b + +# white +color7 #a89983 +color15 #ebdbb2 + +# color0 #000000 +# color8 #767676 + +#: black + +# color1 #cc0403 +# color9 #f2201f + +#: red + +# color2 #19cb00 +# color10 #23fd00 + +#: green + +# color3 #cecb00 +# color11 #fffd00 + +#: yellow + +# color4 #0d73cc +# color12 #1a8fff + +#: blue + +# color5 #cb1ed1 +# color13 #fd28ff + +#: magenta + +# color6 #0dcdcd +# color14 #14ffff + +#: cyan + +# color7 #dddddd +# color15 #ffffff + +#: white + +# mark1_foreground black + +#: Color for marks of type 1 + +# mark1_background #98d3cb + +#: Color for marks of type 1 (light steel blue) + +# mark2_foreground black + +#: Color for marks of type 2 + +# mark2_background #f2dcd3 + +#: Color for marks of type 1 (beige) + +# mark3_foreground black + +#: Color for marks of type 3 + +# mark3_background #f274bc + +#: Color for marks of type 3 (violet) + +#: }}} + +#: }}} + +#: Advanced {{{ + +shell fish + +#: The shell program to execute. The default value of . means to use +#: whatever shell is set as the default shell for the current user. +#: Note that on macOS if you change this, you might need to add +#: --login and --interactive to ensure that the shell starts in +#: interactive mode and reads its startup rc files. + +editor nvim + +#: The terminal editor (such as ``vim`` or ``nano``) to use when +#: editing the kitty config file or similar tasks. + +#: The default value of . means to use the environment variables +#: VISUAL and EDITOR in that order. If these variables aren't set, +#: kitty will run your shell (``$SHELL -l -i -c env``) to see if your +#: shell config files set VISUAL or EDITOR. If that doesn't work, +#: kitty will cycle through various known editors (``vim``, ``emacs``, +#: etc) and take the first one that exists on your system. + +# close_on_child_death no + +#: Close the window when the child process (shell) exits. If no (the +#: default), the terminal will remain open when the child exits as +#: long as there are still processes outputting to the terminal (for +#: example disowned or backgrounded processes). If yes, the window +#: will close as soon as the child process exits. Note that setting it +#: to yes means that any background processes still using the terminal +#: can fail silently because their stdout/stderr/stdin no longer work. + +# allow_remote_control no + +#: Allow other programs to control kitty. If you turn this on other +#: programs can control all aspects of kitty, including sending text +#: to kitty windows, opening new windows, closing windows, reading the +#: content of windows, etc. Note that this even works over ssh +#: connections. You can chose to either allow any program running +#: within kitty to control it, with yes or only programs that connect +#: to the socket specified with the kitty --listen-on command line +#: option, if you use the value socket-only. The latter is useful if +#: you want to prevent programs running on a remote computer over ssh +#: from controlling kitty. Reloading the config will not affect this +#: setting. + +# listen_on none + +#: Tell kitty to listen to the specified unix/tcp socket for remote +#: control connections. Note that this will apply to all kitty +#: instances. It can be overridden by the kitty --listen-on command +#: line flag. This option accepts only UNIX sockets, such as +#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment +#: variables are expanded. If {kitty_pid} is present then it is +#: replaced by the PID of the kitty process, otherwise the PID of the +#: kitty process is appended to the value, with a hyphen. This option +#: is ignored unless you also set allow_remote_control to enable +#: remote control. See the help for kitty --listen-on for more +#: details. Changing this option by reloading the config is not +#: supported. + +# env + +#: Specify environment variables to set in all child processes. Note +#: that environment variables are expanded recursively, so if you +#: use:: + +#: env MYVAR1=a +#: env MYVAR2=${MYVAR1}/${HOME}/b + +#: The value of MYVAR2 will be a//b. Using +#: VAR= will set it to the empty string and using just VAR will delete +#: the variable from the child process' environment. + +# watcher + +#: Path to python file which will be loaded for +#: https://sw.kovidgoyal.net/kitty/launch/#watchers. Can be specified +#: more than once to load multiple watchers. The watchers will be +#: added to every kitty window. Relative paths are resolved relative +#: to the kitty config directory. Note that reloading the config will +#: only affect windows created after the reload. + +# exe_search_path + +#: Control where kitty looks to find programs to run. The default +#: search order is: First search the system wide PATH, then +#: ~/.local/bin and ~/bin. If not still not found, the PATH defined in +#: the login shell after sourcing all its startup files is tried. +#: Finally, if present, the PATH in the env option is tried. + +#: This option allows you to prepend, append, or remove paths from +#: this search order. It can be specified multiple times for multiple +#: paths. A simple path will be prepended to the search order. A path +#: that starts with the + sign will be append to the search order, +#: after ~/bin above. A path that starts with the - sign will be +#: removed from the entire search order. For example:: + +#: exe_search_path /some/prepended/path +#: exe_search_path +/some/appended/path +#: exe_search_path -/some/excluded/path + +# update_check_interval 24 + +#: Periodically check if an update to kitty is available. If an update +#: is found a system notification is displayed informing you of the +#: available update. The default is to check every 24 hrs, set to zero +#: to disable. Changing this option by reloading the config is not +#: supported. + +# startup_session none + +#: Path to a session file to use for all kitty instances. Can be +#: overridden by using the kitty --session command line option for +#: individual instances. See +#: https://sw.kovidgoyal.net/kitty/overview/#startup-sessions in the +#: kitty documentation for details. Note that relative paths are +#: interpreted with respect to the kitty config directory. Environment +#: variables in the path are expanded. Changing this option by +#: reloading the config is not supported. + +# clipboard_control write-clipboard write-primary read-clipboard-ask read-primary-ask + +#: Allow programs running in kitty to read and write from the +#: clipboard. You can control exactly which actions are allowed. The +#: set of possible actions is: write-clipboard read-clipboard write- +#: primary read-primary read-clipboard-ask read-primary-ask. The +#: default is to allow writing to the clipboard and primary selection +#: and to ask for permission when a program tries to read from the +#: clipboard. Note that disabling the read confirmation is a security +#: risk as it means that any program, even one running on a remote +#: server via SSH can read your clipboard. See also +#: clipboard_max_size. + +# clipboard_max_size 64 + +#: The maximum size (in MB) of data from programs running in kitty +#: that will be stored for writing to the system clipboard. See also +#: clipboard_control. A value of zero means no size limit is applied. + +# file_transfer_confirmation_bypass + +#: A password, that can be supplied to the file transfer kitten to +#: skip the transfer confirmation prompt. This should only be used +#: when initiating transfers from trusted computers, over trusted +#: networks or encrypted transports, as it allows programs running on +#: the remote machine to read/write to the local filesystem, without +#: permission. + +# allow_hyperlinks yes + +#: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8 +#: escape sequences are ignored. Otherwise they become clickable +#: links, that you can click by with the mouse or the hints kitten +#: . The special value of ``ask`` means that kitty +#: will ask before opening the link when clicked. + +shell_integration enabled + +#: Enable shell integration on supported shells. This enables features +#: such as jumping to previous prompts, browsing the output of the +#: previous command in a pager, etc. on supported shells. Set to +#: ``disabled`` to turn off shell integration, completely. See +#: https://sw.kovidgoyal.net/kitty/shell-integration/ for details. + +# term xterm-kitty + +#: The value of the TERM environment variable to set. Changing this +#: can break many terminal programs, only change it if you know what +#: you are doing, not because you read some advice on Stack Overflow +#: to change it. The TERM variable is used by various programs to get +#: information about the capabilities and behavior of the terminal. If +#: you change it, depending on what programs you run, and how +#: different the terminal you are changing it to is, various things +#: from key-presses, to colors, to various advanced features may not +#: work. Changing this option by reloading the config will only affect +#: newly created windows. + +#: }}} + +#: OS specific tweaks {{{ + +# wayland_titlebar_color system + +#: Change the color of the kitty window's titlebar on Wayland systems +#: with client side window decorations such as GNOME. A value of +#: system means to use the default system color, a value of background +#: means to use the background color of the currently active window +#: and finally you can use an arbitrary color, such as #12af59 or red. + +# macos_titlebar_color system + +#: Change the color of the kitty window's titlebar on macOS. A value +#: of system means to use the default system color, light or dark can +#: also be used to set it explicitly. A value of background means to +#: use the background color of the currently active window and finally +#: you can use an arbitrary color, such as #12af59 or red. WARNING: +#: This option works by using a hack, as there is no proper Cocoa API +#: for it. It sets the background color of the entire window and makes +#: the titlebar transparent. As such it is incompatible with +#: background_opacity. If you want to use both, you are probably +#: better off just hiding the titlebar with hide_window_decorations. + +# macos_option_as_alt no + +#: Use the option key as an alt key. With this set to no, kitty will +#: use the macOS native Option+Key = unicode character behavior. This +#: will break any Alt+key keyboard shortcuts in your terminal +#: programs, but you can use the macOS unicode input technique. You +#: can use the values: left, right, or both to use only the left, +#: right or both Option keys as Alt, instead. Changing this setting by +#: reloading the config is not supported. + +# macos_hide_from_tasks no + +#: Hide the kitty window from running tasks (⌘+Tab) on macOS. Changing +#: this setting by reloading the config is not supported. + +# macos_quit_when_last_window_closed no + +#: Have kitty quit when all the top-level windows are closed. By +#: default, kitty will stay running, even with no open windows, as is +#: the expected behavior on macOS. + +# macos_window_resizable yes + +#: Disable this if you want kitty top-level (OS) windows to not be +#: resizable on macOS. Changing this setting by reloading the config +#: will only affect newly created windows. + +# macos_thicken_font 0 + +#: Draw an extra border around the font with the given width, to +#: increase legibility at small font sizes. For example, a value of +#: 0.75 will result in rendering that looks similar to sub-pixel +#: antialiasing at common font sizes. + +# macos_traditional_fullscreen no + +#: Use the traditional full-screen transition, that is faster, but +#: less pretty. + +# macos_show_window_title_in all + +#: Show or hide the window title in the macOS window or menu-bar. A +#: value of window will show the title of the currently active window +#: at the top of the macOS window. A value of menubar will show the +#: title of the currently active window in the macOS menu-bar, making +#: use of otherwise wasted space. all will show the title everywhere +#: and none hides the title in the window and the menu-bar. + +# macos_custom_beam_cursor no + +#: Enable/disable custom mouse cursor for macOS that is easier to see +#: on both light and dark backgrounds. WARNING: this might make your +#: mouse cursor invisible on dual GPU machines. Changing this setting +#: by reloading the config is not supported. + +# linux_display_server auto + +#: Choose between Wayland and X11 backends. By default, an appropriate +#: backend based on the system state is chosen automatically. Set it +#: to x11 or wayland to force the choice. Changing this setting by +#: reloading the config is not supported. + +#: }}} + +#: Keyboard shortcuts {{{ + +#: Keys are identified simply by their lowercase unicode characters. +#: For example: ``a`` for the A key, ``[`` for the left square bracket +#: key, etc. For functional keys, such as ``Enter or Escape`` the +#: names are present at https://sw.kovidgoyal.net/kitty/keyboard- +#: protocol/#functional-key-definitions. For modifier keys, the names +#: are ctrl (control, ⌃), shift (⇧), alt (opt, option, ⌥), super (cmd, +#: command, ⌘). See also: GLFW mods +#: + +#: On Linux you can also use XKB key names to bind keys that are not +#: supported by GLFW. See XKB keys +#: for a list of key names. The name to use is the part +#: after the XKB_KEY_ prefix. Note that you can only use an XKB key +#: name for keys that are not known as GLFW keys. + +#: Finally, you can use raw system key codes to map keys, again only +#: for keys that are not known as GLFW keys. To see the system key +#: code for a key, start kitty with the kitty --debug-input option. +#: Then kitty will output some debug text for every key event. In that +#: text look for ``native_code`` the value of that becomes the key +#: name in the shortcut. For example: + +#: .. code-block:: none + +#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' + +#: Here, the key name for the A key is 0x61 and you can use it with:: + +#: map ctrl+0x61 something + +#: to map ctrl+a to something. + +#: You can use the special action no_op to unmap a keyboard shortcut +#: that is assigned in the default configuration:: + +#: map kitty_mod+space no_op + +#: If you would like kitty to completely ignore a key event, not even +#: sending it to the program running in the terminal, map it to +#: discard_event:: + +#: map kitty_mod+f1 discard_event + +#: You can combine multiple actions to be triggered by a single +#: shortcut, using the syntax below:: + +#: map key combine action1 action2 action3 ... + +#: For example:: + +#: map kitty_mod+e combine : new_window : next_layout + +#: this will create a new window and switch to the next available +#: layout + +#: You can use multi-key shortcuts using the syntax shown below:: + +#: map key1>key2>key3 action + +#: For example:: + +#: map ctrl+f>2 set_font_size 20 + +#: The full list of actions that can be mapped to key presses is +#: available here . + +kitty_mod ctrl+shift + +#: The value of kitty_mod is used as the modifier for all default +#: shortcuts, you can change it in your kitty.conf to change the +#: modifiers for all the default shortcuts. + +# clear_all_shortcuts no + +#: You can have kitty remove all shortcut definition seen up to this +#: point. Useful, for instance, to remove the default shortcuts. + +# action_alias + +#: E.g. action_alias launch_tab launch --type=tab --cwd=current + +#: Define aliases to avoid repeating the same options in multiple +#: mappings. Aliases can be defined for any action. Aliases are +#: expanded recursively. For example, the above alias allows you to +#: create mappings to launch a new tab in the current working +#: directory without duplication:: + +#: map f1 launch_tab vim +#: map f2 launch_tab emacs + +#: Similarly, to alias kitten invocation:: + +#: action_alias hints kitten hints --hints-offset=0 + +# kitten_alias + +#: E.g. kitten_alias hints hints --hints-offset=0 + +#: Like action_alias above but, specifically for kittens. Generally, +#: prefer to use action_alias. This option is a legacy version, +#: present for backwards compatibility. It causes all invocations of +#: the aliased kitten to be substituted. So the example above will +#: cause all invocations of the hints kitten to have the --hints- +#: offset=0 option applied. + +#: Clipboard {{{ + +#: Copy to clipboard + +# map kitty_mod+c copy_to_clipboard + +#:: There is also a copy_or_interrupt action that can be optionally +#:: mapped to Ctrl+c. It will copy only if there is a selection and +#:: send an interrupt otherwise. Similarly, +#:: copy_and_clear_or_interrupt will copy and clear the selection or +#:: send an interrupt if there is no selection. + +#: Paste from clipboard + +# map kitty_mod+v paste_from_clipboard + +#: Paste from selection + +# map kitty_mod+s paste_from_selection +# map shift+insert paste_from_selection + +#: Pass selection to program + +# map kitty_mod+o pass_selection_to_program + +#:: You can also pass the contents of the current selection to any +#:: program using pass_selection_to_program. By default, the system's +#:: open program is used, but you can specify your own, the selection +#:: will be passed as a command line argument to the program, for +#:: example:: + +#:: map kitty_mod+o pass_selection_to_program firefox + +#:: You can pass the current selection to a terminal program running +#:: in a new kitty window, by using the @selection placeholder:: + +#:: map kitty_mod+y new_window less @selection + +#: }}} + +#: Scrolling {{{ + +#: Scroll line up + +# map kitty_mod+up scroll_line_up +# map kitty_mod+k scroll_line_up +# map opt+cmd+page_up scroll_line_up +# map cmd+up scroll_line_up + +#: Scroll line down + +# map kitty_mod+down scroll_line_down +# map kitty_mod+j scroll_line_down +# map opt+cmd+page_down scroll_line_down +# map cmd+down scroll_line_down + +#: Scroll page up + +# map kitty_mod+page_up scroll_page_up +# map cmd+page_up scroll_page_up + +#: Scroll page down + +# map kitty_mod+page_down scroll_page_down +# map cmd+page_down scroll_page_down + +#: Scroll to top + +# map kitty_mod+home scroll_home +# map cmd+home scroll_home + +#: Scroll to bottom + +# map kitty_mod+end scroll_end +# map cmd+end scroll_end + +#: Scroll to previous shell prompt + +# map kitty_mod+z scroll_to_prompt -1 + +#:: Use a parameter of zero for scroll_to_prompt to scroll to the +#:: last jumped to or the last clicked position. Requires +#:: https://sw.kovidgoyal.net/kitty/shell-integration/ to work. + +#: Scroll to next shell prompt + +# map kitty_mod+x scroll_to_prompt 1 + +#: Browse scrollback buffer in pager + +# map kitty_mod+h show_scrollback + +#:: You can pipe the contents of the current screen + history buffer +#:: as STDIN to an arbitrary program using the ``launch`` function. +#:: For example, the following opens the scrollback buffer in less in +#:: an overlay window:: + +#:: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R + +#:: For more details on piping screen and buffer contents to external +#:: programs, see launch. + +#: Browse output of the last shell command in pager + +# map kitty_mod+g show_last_command_output + +#:: You can also define additional shortcuts to get the command +#:: output. For example, to get the first command output on screen:: + +#:: map f1 show_first_command_output_on_screen + +#:: To get the command output that was last accessed by a keyboard +#:: action or mouse action:: + +#:: map f1 show_last_visited_command_output + +#:: You can pipe the output of the last command run in the shell +#:: using the launch function. For example, the following opens the +#:: output in less in an overlay window:: + +#:: map f1 launch --stdin-source=@last_cmd_output --stdin-add-formatting --type=overlay less +G -R + +#:: To get the output of the first command on the screen, use +#:: @first_cmd_output_on_screen. To get the output of the last jumped +#:: to command, use @last_visited_cmd_output. + +#:: Requires https://sw.kovidgoyal.net/kitty/shell-integration/ to +#:: work. + +#: }}} + +#: Window management {{{ + +#: New window + +# map kitty_mod+enter new_window +# map cmd+enter new_window + +#:: You can open a new window running an arbitrary program, for +#:: example:: + +#:: map kitty_mod+y launch mutt + +#:: You can open a new window with the current working directory set +#:: to the working directory of the current window using:: + +#:: map ctrl+alt+enter launch --cwd=current + +#:: You can open a new window that is allowed to control kitty via +#:: the kitty remote control facility by prefixing the command line +#:: with @. Any programs running in that window will be allowed to +#:: control kitty. For example:: + +#:: map ctrl+enter launch --allow-remote-control some_program + +#:: You can open a new window next to the currently active window or +#:: as the first window, with:: + +#:: map ctrl+n launch --location=neighbor some_program +#:: map ctrl+f launch --location=first some_program + +#:: For more details, see launch. + +#: New OS window + +# map kitty_mod+n new_os_window +# map cmd+n new_os_window + +#:: Works like new_window above, except that it opens a top level OS +#:: kitty window. In particular you can use new_os_window_with_cwd to +#:: open a window with the current working directory. + +#: Close window + +# map kitty_mod+w close_window +# map shift+cmd+d close_window + +#: Next window + +# map kitty_mod+] next_window + +#: Previous window + +# map kitty_mod+[ previous_window + +#: Move window forward + +# map kitty_mod+f move_window_forward + +#: Move window backward + +# map kitty_mod+b move_window_backward + +#: Move window to top + +# map kitty_mod+` move_window_to_top + +#: Start resizing window + +# map kitty_mod+r start_resizing_window +# map cmd+r start_resizing_window + +#: First window + +# map kitty_mod+1 first_window +# map cmd+1 first_window + +#: Second window + +# map kitty_mod+2 second_window +# map cmd+2 second_window + +#: Third window + +# map kitty_mod+3 third_window +# map cmd+3 third_window + +#: Fourth window + +# map kitty_mod+4 fourth_window +# map cmd+4 fourth_window + +#: Fifth window + +# map kitty_mod+5 fifth_window +# map cmd+5 fifth_window + +#: Sixth window + +# map kitty_mod+6 sixth_window +# map cmd+6 sixth_window + +#: Seventh window + +# map kitty_mod+7 seventh_window +# map cmd+7 seventh_window + +#: Eight window + +# map kitty_mod+8 eighth_window +# map cmd+8 eighth_window + +#: Ninth window + +# map kitty_mod+9 ninth_window +# map cmd+9 ninth_window + +#: Tenth window + +# map kitty_mod+0 tenth_window + +#: Visually select focus window + +# map kitty_mod+f7 focus_visible_window + +#: Visually swap window with another + +# map kitty_mod+f8 swap_with_window + +#: }}} + +#: Tab management {{{ + +#: Next tab + +# map kitty_mod+right next_tab +# map shift+cmd+] next_tab +# map ctrl+tab next_tab + +#: Previous tab + +# map kitty_mod+left previous_tab +# map shift+cmd+[ previous_tab +# map ctrl+shift+tab previous_tab + +#: New tab + +# map kitty_mod+t new_tab +# map cmd+t new_tab + +#: Close tab + +# map kitty_mod+q close_tab +# map cmd+w close_tab + +#: Close OS window + +# map shift+cmd+w close_os_window + +#: Move tab forward + +# map kitty_mod+. move_tab_forward + +#: Move tab backward + +# map kitty_mod+, move_tab_backward + +#: Set tab title + +# map kitty_mod+alt+t set_tab_title +# map shift+cmd+i set_tab_title + + +#: You can also create shortcuts to go to specific tabs, with 1 being +#: the first tab, 2 the second tab and -1 being the previously active +#: tab, and any number larger than the last tab being the last tab:: + +#: map ctrl+alt+1 goto_tab 1 +#: map ctrl+alt+2 goto_tab 2 + +#: Just as with new_window above, you can also pass the name of +#: arbitrary commands to run when using new_tab and use +#: new_tab_with_cwd. Finally, if you want the new tab to open next to +#: the current tab rather than at the end of the tabs list, use:: + +#: map ctrl+t new_tab !neighbor [optional cmd to run] +#: }}} + +#: Layout management {{{ + +#: Next layout + +map kitty_mod+l next_layout + + +#: You can also create shortcuts to switch to specific layouts:: + +#: map ctrl+alt+t goto_layout tall +#: map ctrl+alt+s goto_layout stack + +#: Similarly, to switch back to the previous layout:: + +#: map ctrl+alt+p last_used_layout + +#: There is also a toggle layout function that switches to the named +#: layout or back to the previous layout if in the named layout. +#: Useful to temporarily "zoom" the active window by switching to the +#: stack layout:: + +#: map ctrl+alt+z toggle_layout stack +#: }}} + +#: Font sizes {{{ + +#: You can change the font size for all top-level kitty OS windows at +#: a time or only the current one. + +#: Increase font size + +map kitty_mod+equal change_font_size all +1.0 +map ctrl+equal change_font_size all +1.0 +map kitty_mod+plus change_font_size all +1.0 +map kitty_mod+kp_add change_font_size all +1.0 +# map cmd+plus change_font_size all +2.0 +# map cmd+equal change_font_size all +2.0 +# map shift+cmd+equal change_font_size all +2.0 + +#: Decrease font size + +map kitty_mod+minus change_font_size all -1.0 +map ctrl+minus change_font_size all -1.0 +map kitty_mod+kp_subtract change_font_size all -1.0 +map cmd+minus change_font_size all -1.0 +# map shift+cmd+minus change_font_size all -2.0 + +#: Reset font size + +map kitty_mod+backspace change_font_size all 0 +map kitty_mod+0 change_font_size all 0 +# map cmd+0 change_font_size all 0 + + +#: To setup shortcuts for specific font sizes:: + +#: map kitty_mod+f6 change_font_size all 10.0 + +#: To setup shortcuts to change only the current OS window's font +#: size:: + +#: map kitty_mod+f6 change_font_size current 10.0 +#: }}} + +#: Select and act on visible text {{{ + +#: Use the hints kitten to select text and either pass it to an +#: external program or insert it into the terminal or copy it to the +#: clipboard. + +#: Open URL + +# map kitty_mod+e open_url_with_hints + +#:: Open a currently visible URL using the keyboard. The program used +#:: to open the URL is specified in open_url_with. + +#: Insert selected path + +# map kitty_mod+p>f kitten hints --type path --program - + +#:: Select a path/filename and insert it into the terminal. Useful, +#:: for instance to run git commands on a filename output from a +#:: previous git command. + +#: Open selected path + +# map kitty_mod+p>shift+f kitten hints --type path + +#:: Select a path/filename and open it with the default open program. + +#: Insert selected line + +# map kitty_mod+p>l kitten hints --type line --program - + +#:: Select a line of text and insert it into the terminal. Use for +#:: the output of things like: ls -1 + +#: Insert selected word + +# map kitty_mod+p>w kitten hints --type word --program - + +#:: Select words and insert into terminal. + +#: Insert selected hash + +# map kitty_mod+p>h kitten hints --type hash --program - + +#:: Select something that looks like a hash and insert it into the +#:: terminal. Useful with git, which uses sha1 hashes to identify +#:: commits + +#: Open the selected file at the selected line + +# map kitty_mod+p>n kitten hints --type linenum + +#:: Select something that looks like filename:linenum and open it in +#:: vim at the specified line number. + +#: Open the selected hyperlink + +# map kitty_mod+p>y kitten hints --type hyperlink + +#:: Select a hyperlink (i.e. a URL that has been marked as such by +#:: the terminal program, for example, by ls --hyperlink=auto). + + +#: The hints kitten has many more modes of operation that you can map +#: to different shortcuts. For a full description see kittens/hints. +#: }}} + +#: Miscellaneous {{{ + +#: Toggle fullscreen + +# map kitty_mod+f11 toggle_fullscreen + +#: Toggle maximized + +# map kitty_mod+f10 toggle_maximized + +#: Toggle macOS secure keyboard entry + +# map opt+cmd+s toggle_macos_secure_keyboard_entry + +#: Unicode input + +# map kitty_mod+u kitten unicode_input +# map ctrl+cmd+space kitten unicode_input + +#: Edit config file + +# map kitty_mod+f2 edit_config_file +# map cmd+, edit_config_file + +#: Open the kitty command shell + +# map kitty_mod+escape kitty_shell window + +#:: Open the kitty shell in a new window/tab/overlay/os_window to +#:: control kitty using commands. + +#: Increase background opacity + +# map kitty_mod+a>m set_background_opacity +0.1 + +#: Decrease background opacity + +# map kitty_mod+a>l set_background_opacity -0.1 + +#: Make background fully opaque + +# map kitty_mod+a>1 set_background_opacity 1 + +#: Reset background opacity + +# map kitty_mod+a>d set_background_opacity default + +#: Reset the terminal + +# map kitty_mod+delete clear_terminal reset active +# map opt+cmd+r clear_terminal reset active + +#:: You can create shortcuts to clear/reset the terminal. For +#:: example:: + +#:: # Reset the terminal +#:: map kitty_mod+f9 clear_terminal reset active +#:: # Clear the terminal screen by erasing all contents +#:: map kitty_mod+f10 clear_terminal clear active +#:: # Clear the terminal scrollback by erasing it +#:: map kitty_mod+f11 clear_terminal scrollback active +#:: # Scroll the contents of the screen into the scrollback +#:: map kitty_mod+f12 clear_terminal scroll active + +#:: If you want to operate on all windows instead of just the current +#:: one, use all instead of active. + +#:: It is also possible to remap Ctrl+L to both scroll the current +#:: screen contents into the scrollback buffer and clear the screen, +#:: instead of just clearing the screen, for example, for ZSH add the +#:: following to ~/.zshrc: + +#:: .. code-block:: sh + +#:: scroll-and-clear-screen() { +#:: printf '\n%.0s' {1..$LINES} +#:: zle clear-screen +#:: } +#:: zle -N scroll-and-clear-screen +#:: bindkey '^l' scroll-and-clear-screen + +#: Reload kitty.conf + +# map kitty_mod+f5 load_config_file +# map ctrl+cmd+, load_config_file + +#:: Reload kitty.conf, applying any changes since the last time it +#:: was loaded. Note that a handful of settings cannot be dynamically +#:: changed and require a full restart of kitty. You can also map a +#:: keybinding to load a different config file, for example:: + +#:: map f5 load_config /path/to/alternative/kitty.conf + +#:: Note that all setting from the original kitty.conf are discarded, +#:: in other words the new conf settings *replace* the old ones. + +#: Debug kitty configuration + +# map kitty_mod+f6 debug_config +# map opt+cmd+, debug_config + +#:: Show details about exactly what configuration kitty is running +#:: with and its host environment. Useful for debugging issues. + +#: Send arbitrary text on key presses + +#:: E.g. map ctrl+shift+alt+h send_text all Hello World + +#:: You can tell kitty to send arbitrary (UTF-8) encoded text to the +#:: client program when pressing specified shortcut keys. For +#:: example:: + +#:: map ctrl+alt+a send_text all Special text + +#:: This will send "Special text" when you press the ctrl+alt+a key +#:: combination. The text to be sent is a python string literal so +#:: you can use escapes like \x1b to send control codes or \u21fb to +#:: send unicode characters (or you can just input the unicode +#:: characters directly as UTF-8 text). The first argument to +#:: send_text is the keyboard modes in which to activate the +#:: shortcut. The possible values are normal or application or kitty +#:: or a comma separated combination of them. The special keyword +#:: all means all modes. The modes normal and application refer to +#:: the DECCKM cursor key mode for terminals, and kitty refers to the +#:: special kitty extended keyboard protocol. + +#:: Another example, that outputs a word and then moves the cursor to +#:: the start of the line (same as pressing the Home key):: + +#:: map ctrl+alt+a send_text normal Word\x1b[H +#:: map ctrl+alt+a send_text application Word\x1bOH + +#: }}} + +#: }}} +# +# my stuff lol +map ctrl+o pass_selection_to_program firefox --search + +map ctrl+shift+l next_layout + +map f5 load_config_file + +window_margin_width 0 +map ctrl+enter new_window + +map ctrl+1 first_window +map ctrl+2 second_window +map ctrl+3 third_window +map ctrl+4 fourth_window +map ctrl+5 fifth_window +map ctrl+6 sixth_window +map ctrl+7 seventh_window +map ctrl+8 eighth_window +map ctrl+9 ninth_window +map ctrl+0 tenth_window + +allow_remote_control yes +map f1 kitten hints --type url --program @ +open +'' diff --git a/nvim.conf.nix b/nvim.conf.nix new file mode 100644 index 0000000..c3b0b48 --- /dev/null +++ b/nvim.conf.nix @@ -0,0 +1,368 @@ +'' +let mapleader = ";" +let maplocalleader = ";;" + +let g:ConqueGdb_GdbExe = 'arm-none-eabi-gdb' + +" call plug#begin('~/.config/nvim/plugged') +" " Using master branch +" call plug#end() + + +"===== Code Completion =====" +autocmd BufEnter * call ncm2#enable_for_buffer() +set completeopt=noinsert,menuone,noselect +" tab to select +" and don't hijack my enter key +inoremap (pumvisible()?(empty(v:completed_item)?"\":"\"):"\") +inoremap (pumvisible()?(empty(v:completed_item)?"\\":"\"):"\") + +"===== Compilation Error Navigation =====" +nmap (coc-diagnostic-next-error) +nmap (coc-diagnostic-next) + + +"===== Key bindings =====" +map :BufExplorer " Explore buffers +map :bnext " Next buffer! +map :bprev " Prev buffer! +map :Commentary " Toggle comment on this line + +map w :w +map q :q + +" mehbark added this, bracket and braces and stuff completion +" https://coderwall.com/p/h1dv0g/completion-for-parentheses-braces-and-brackets-in-vim +" inoremap { {} +" inoremap {{ { +" inoremap {} {} +" inoremap { {}O +" inoremap [ [] +" inoremap [[ [ +" inoremap [] [] +" inoremap ( () +" inoremap (( ( +" inoremap () () +" inoremap " "" +" inoremap "" "" + +"===== Airline =====" +set ttimeoutlen=50 +set laststatus=2 +let g:airline_powerline_fonts = 1 +let g:airline_theme='base16' +let g:airline#extensions#tabline#enabled = 1 +" let g:airline_left_sep="" +" let g:airline_right_sep="" +" let g:airline#extensions#whitespace#checks = [ 'indent' ] + +" Map f4 to switch header/source for c projects +map :A + +" remove trailing white spaces when saving +autocmd BufWritePre * :%s/\s\+$//e + +" OCaml settings +filetype indent on +filetype plugin on + +au BufRead,BufNewFile *.ml,*.mli compiler ocaml + +" different color schemes depending on the file type +syntax enable +"let g:rehash256 = 1 +colorscheme gruvbox + + +"===== NERDTree =====" +"Auto close if only NERDTree is open +autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif + +"Open nerd tree if no cl argument supplied +" function! StartUp() +" if 0 == argc() +" NERDTree . +" end +" endfunction +" let g:NERDTreeWinPos = 'right' + +" autocmd VimEnter * call StartUp() + +"toggle on Ctrl+n +map :NERDTreeToggle + +" let g:NERDTreeWinSize=60 + + +"===== Rust =====" +autocmd FileType rust nnoremap :RustFmt +let g:rustfmt_autosave = 1 +let g:rustfmt_command = "rustfmt" +au BufNewFile,BufRead *.rs setlocal colorcolumn=100 +let g:ycm_rust_src_path = '~/.rustup/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src' + + +"===== Nvim Behaviour =====" +" Changes regular vim behaviours +" Set so the files auto updates when changed on disk +set autoread + +" No swap files +set backupdir-=. +set backupdir^=~/tmp,/tmp + +" Fold the code +set foldmethod=syntax +" activate the folder +set foldcolumn=1 +" automatically fold larger files, for small ones, it doesn't matter +autocmd! BufReadPost * :if line('$') < 200 | set foldlevel=99 | else | set foldlevel=1 |endif +" Relative line numbers in normal mode, absolute in insert (mainly for reading errors easier) +set number + +autocmd InsertEnter * :set norelativenumber +autocmd InsertLeave * :set relativenumber + + +"===== Persistent Undo =====" +" Keep undo history across sessions, by storing in file. +silent !mkdir ~/.config/nvim/backups > /dev/null 2>&1 +set undodir=~/.config/nvim/backups +set undofile + + +"===== Close current buffer =====" +nnoremap :BW + + +"===== Typo fixes =====" +"Fix common typos when saving and exiting +command WQ wq +command Wq wq +command W w +command Q q + + +"===== Misc =====" +set nocompatible +" Dont update view in scripts, 10000 times speedup +set lazyredraw +" set Colour support so airline works +set t_Co=256 +" set mouse activated +set mouse=a +set clipboard=unnamedplus +" Include stdlib dirs for 'gf' command. Also include all subdir in +" workingfolder +let &path.="src/include,/usr/include/AL,.**" +" Search for tags file, from current directory until home directory +set tags=./tags;$HOME + + +"===== Terminal =====" +" Set exiting term mode to esc esc +tnoremap + + +set incsearch +set ignorecase +set smartcase +set tabstop=4 shiftwidth=4 expandtab +set wrap linebreak nolist " list disables line break +" indicate where the 80 chars wide is +set cc=100 +set textwidth=0 +set wrapmargin=0 +" set spell spelllang=en_us +set number +set relativenumber +set langmenu=en_US +let $LANG = 'en_US' +set cursorline +" retain undo history in buffers +set hidden +" set so the files auto updates when changed on disk +set autoread +" Better default for yanking +:map Y y$ +" Set yank highlight to something reasonable +let g:highlightedyank_highlight_duration = 150 + + +"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" +"==== Haskell +"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" +let g:haskell_enable_quantification = 1 " to enable highlighting of `forall` +let g:haskell_enable_recursivedo = 1 " to enable highlighting of `mdo` and `rec` +let g:haskell_enable_arrowsyntax = 1 " to enable highlighting of `proc` +let g:haskell_enable_pattern_synonyms = 1 " to enable highlighting of `pattern` +let g:haskell_enable_typeroles = 1 " to enable highlighting of type roles +let g:haskell_enable_static_pointers = 1 " to enable highlighting of `static` +let g:haskell_backpack = 1 " to enable highlighting of backpack keywords + +"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" +"==== Coc settings +"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" + +" Give more space for displaying messages. +set cmdheight=2 + +" Having longer updatetime (default is 4000 ms = 4 s) leads to noticeable +" delays and poor user experience. +set updatetime=300 + +" Don't pass messages to |ins-completion-menu|. +set shortmess+=c + +" Always show the signcolumn, otherwise it would shift the text each time +" diagnostics appear/become resolved. +set signcolumn=yes + +"function! s:check_back_space() abort +" let col = col('.') - 1 +" return !col || getline('.')[col - 1] =~# '\s' +"endfunction +" +"" Use tab for trigger completion with characters ahead and navigate. +"" NOTE: Use command ':verbose imap ' to make sure tab is not mapped by +"" other plugin before putting this into your config. +"inoremap +" \ pumvisible() ? "\" : +" \ check_back_space() ? "\" : +" \ coc#refresh() +"inoremap pumvisible() ? "\" : "\" + +inoremap + \ coc#pum#visible() ? coc#pum#next(1) : + \ CheckBackspace() ? "\" : + \ coc#refresh() +inoremap coc#pum#visible() ? coc#pum#prev(1) : "\" + +function! CheckBackspace() abort + let col = col('.') - 1 + return !col || getline('.')[col - 1] =~# '\s' +endfunction + +" Make to accept selected completion item or notify coc.nvim to format +" u breaks current undo, please make your own choice. +inoremap coc#pum#visible() ? coc#pum#confirm() + \: "\u\\=coc#on_enter()\" + +" Use to trigger completion. +inoremap coc#refresh() + +" Use to confirm completion, `u` means break undo chain at current +" position. Coc only does snippet and additional edit on confirm. +" if has('patch8.1.1068') +" " Use `complete_info` if your (Neo)Vim version supports it. +" inoremap complete_info()["selected"] != "-1" ? "\" : "\u\" +" else +" imap pumvisible() ? "\" : "\u\" +" endif + +" Use `[g` and `]g` to navigate diagnostics +nmap [g (coc-diagnostic-prev) +nmap ]g (coc-diagnostic-next) + +" GoTo code navigation. +nmap gd (coc-definition) +nmap gy (coc-type-definition) +nmap gi (coc-implementation) +nmap gr (coc-references) + +" Use K to show documentation in preview window. +nnoremap K :call show_documentation() + +let g:sexp_insert_after_wrap = 0 + +function! s:show_documentation() + if (index(['vim','help'], &filetype) >= 0) + execute 'h '.expand('') + else + call CocAction('doHover') + endif +endfunction + +" Highlight the symbol and its references when holding the cursor. +autocmd CursorHold * silent call CocActionAsync('highlight') + +" Symbol renaming. +nmap rn (coc-rename) + +" Formatting selected code. +xmap f (coc-format-selected) +nmap f (coc-format-selected) + +augroup mygroup + autocmd! + " Setup formatexpr specified filetype(s). + autocmd FileType typescript,json setl formatexpr=CocAction('formatSelected') + " Update signature help on jump placeholder. + autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp') +augroup end + +" Applying codeAction to the selected region. +" Example: `aap` for current paragraph +xmap a (coc-codeaction-selected) +nmap a (coc-codeaction-selected) + +" Remap keys for applying codeAction to the current line. +nmap ac (coc-codeaction) +" Apply AutoFix to problem on the current line. +nmap qf (coc-fix-current) + +" Introduce function text object +" NOTE: Requires 'textDocument.documentSymbol' support from the language server. +xmap if (coc-funcobj-i) +xmap af (coc-funcobj-a) +omap if (coc-funcobj-i) +omap af (coc-funcobj-a) + +" Use for selections ranges. +" NOTE: Requires 'textDocument/selectionRange' support from the language server. +" coc-tsserver, coc-python are the examples of servers that support it. +nmap (coc-range-select) +xmap (coc-range-select) + +" Add `:Format` command to format current buffer. +command! -nargs=0 Format :call CocAction('format') + +" Add `:Fold` command to fold current buffer. +command! -nargs=? Fold :call CocAction('fold', ) + +" Add `:OR` command for organize imports of the current buffer. +command! -nargs=0 OR :call CocAction('runCommand', 'editor.action.organizeImport') + +let g:airline#extensions#coc#enabled = 1 +" Add (Neo)Vim's native statusline support. +" NOTE: Please see `:h coc-status` for integrations with external plugins that +" provide custom statusline: lightline.vim, vim-airline. +set statusline^=%{coc#status()}%{get(b:,'coc_current_function',''')} + +" hopefully this fixes the weird thing with the working directory being a +" parent directory +" it hasn't, yet +set autochdir + +" Mappings using CoCList: +" Show all diagnostics. +" nnoremap a :CocList diagnostics +" Manage extensions. +" nnoremap e :CocList extensions +" Show commands. +" nnoremap c :CocList commands +" Find symbol of current document. +" nnoremap o :CocList outline +" Search workspace symbols. +" nnoremap s :CocList -I symbols +" Do default action for next item. +" nnoremap j :CocNext +" Do default action for previous item. +" nnoremap k :CocPrev +" Resume latest coc list. +" nnoremap p :CocListResume + +"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" +" / Coc settings +"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""" +''